Discover jobs
Job Search
drywall installer
Posted on September 26, 2024 by Employer details PBX BUILDERS LTD
Job details
Education: Secondary (high) school graduation certificate. Work site environment: At heights. Noisy. Outdoors. Work setting: Commercial. Industrial. Institutional. Remote location. Residential. Rural area. Urban area. Various locations. Tasks: Prepare tenders and quotations. Instruct apprentices. Supervise other workers. Apply successive coats of compound and sand seams and joints. Apply, level and smooth coats of plaster. Clean and prepare surfaces. Cure freshly plastered surfaces. Cut and install metal corner beads to protect exterior corners. Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings. Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife. Finish corners and angles and create decorative designs in finish coat, if required. Measure, cut, fit and install drywall sheets. Mix plaster ingredients to desired consistency. Mould and install ornamental plaster panels, cornices and trim. Position and secure sheets to metal or wooden studs or joists. Smooth out excess compound and allow coat to dry. Spray acoustic or texture materials over walls and ceilings. Tape over joints using taping machine and embed tape in compound. Trowel or spray coats of stucco over exteriors of buildings to form weatherproof surfaces. Attach metal or gypsum lath to studs or furring. Cut openings in lath for heating and ventilation piping, ducts and electrical outlets. Install acoustic tile, hangers for suspended ceilings and metal studs for composition wallboard or lath. Install corner beads and wire mesh around beams to which plaster is to be applied. Install exterior and interior steel studs. Install metal stud framing and furring for interior drywall or plaster walls and ceilings, using hand and power tools. Install vapour barriers and thermal and sound insulation. Prepare wall and ceiling layouts. Utilize laser alignment system. Estimate costs and materials. Operate CADD and other computer software systems. Work at heights, on scaffolding or swing stages. Erect and install scaffolding, falsework and other working platforms. Read and interpret blueprints, maps, drawings and specifications. Experience: 1 to less than 7 months.- LocationBrampton, ON
- Workplace information On site
- Salary$36.00HOUR hourly / 35 to 40 hours bi-weekly
- Terms of employment Permanent employmentFull time
- Day, Evening, Weekend, Shift, Early Morning
- Starts as soon as possible
- vacancies 2 vacancies
- Source Job Bank #3096146
Overview
Languages
English
Education
- Secondary (high) school graduation certificate
Experience
1 to less than 7 months
On site
Work must be completed at the physical location. There is no option to work remotely.
Work site environment
- At heights
- Noisy
- Outdoors
Work setting
- Commercial
- Industrial
- Institutional
- Remote location
- Residential
- Rural area
- Urban area
- Various locations
Responsibilities
Tasks
- Prepare tenders and quotations
- Instruct apprentices
- Supervise other workers
- Apply successive coats of compound and sand seams and joints
- Apply, level and smooth coats of plaster
- Clean and prepare surfaces
- Cure freshly plastered surfaces
- Cut and install metal corner beads to protect exterior corners
- Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings
- Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife
- Finish corners and angles and create decorative designs in finish coat, if required
- Measure, cut, fit and install drywall sheets
- Mix plaster ingredients to desired consistency
- Mould and install ornamental plaster panels, cornices and trim
- Position and secure sheets to metal or wooden studs or joists
- Smooth out excess compound and allow coat to dry
- Spray acoustic or texture materials over walls and ceilings
- Tape over joints using taping machine and embed tape in compound
- Trowel or spray coats of stucco over exteriors of buildings to form weatherproof surfaces
- Attach metal or gypsum lath to studs or furring
- Cut openings in lath for heating and ventilation piping, ducts and electrical outlets
- Install acoustic tile, hangers for suspended ceilings and metal studs for composition wallboard or lath
- Install corner beads and wire mesh around beams to which plaster is to be applied
- Install exterior and interior steel studs
- Install metal stud framing and furring for interior drywall or plaster walls and ceilings, using hand and power tools
- Install vapour barriers and thermal and sound insulation
- Prepare wall and ceiling layouts
- Utilize laser alignment system
- Estimate costs and materials
- Operate CADD and other computer software systems
- Work at heights, on scaffolding or swing stages
- Erect and install scaffolding, falsework and other working platforms
- Read and interpret blueprints, maps, drawings and specifications
Who can apply to this job?
Only apply to this job if:
- You are a Canadian citizen, a permanent or a temporary resident of Canada.
- You have a valid Canadian work permit.
If you are not authorized to work in Canada, do not apply. The employer will not respond to your application.
Advertised until
2024-10-26
Important notice: This job posting was posted directly by the employer on Job Bank. The Government of Canada has taken steps to make sure it is accurate and reliable but cannot guarantee its authenticity.
Report a problem with this job posting
- Date modified: